Manual Press: Tighten dial until the press won’t close. Loosen dial progressively until the press closes.
Hotronix and Geo Knight: 8-9
Pneumatic Press: 40-50 PSI
Step 2:
Pre press the tee for 10 seconds
Pressing the tee removes the moisture from the tee ensuring proper adhesion and minimizing potential for shrinakge.
Step 3:
Press Transfer graphic on Tee for
12-15 seconds
Step 4:
Remove Transfer paper immediately while still hot
Step 5:
Place Foil sheet over tee and press again for 10-15 seconds ( peel foil sheet cold (45 seconds to cool)
Step 6:
Smoothly & with one motion rip the foil from one corner without hesitation
Here from Etsy? Order using our website for 12% discount next time!
Need Help?
Always test press your transfer on a spoiled or old tee to dial in your heat press before pressing your production (AMS Transfers always provides extras for this reason)
Transfer not sticking to the tee? Increase your pressure, ensure even heating, and quickly peel your transfer within 2 seconds.
Not getting a clean rip with foil? Try ripping the foil off faster.
Still won't peel easily? Repress for 4 seconds then try using a different corner
These insturctions are just your starting point, each garment and material is different and should be tested to ensure proper adhesion.
Need Help? - Alex@amsmanufacturing.com or Live Chat!
